产品介绍

- 详细内容 -

产品信息
产品型号:  PSE-SW5G25D4
Model Input Voltage (REAR) Input Voltage (Port 5) Output voltage
PSE-SW5G65B4 6-36VDC No input 56VDC
(regulated)
No input 44-57VDC 44-57VDC
(non-regulated)
6-36VDC 44-57VDC 56VDC
(regulated)

Technical Specifications
Standards IEEE802.3/IEEE802.3u/Standards/IEEE802.3ab(10/100/1000base-T)
Ports 5 ports with PoE (4 PSE & 1 PD), support auto-crossover &
auto-polarity
Transmission speed 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T)
Auto-negotiation
Switch Technology store-and-forward
Protocols CSMA/CD
Flow Control IEEE802.3X(full-duplex), back pressure( half-duplex)
Data Transmission Rate 1488000 pps for 1000 base-T, 148800pps for 100base-T, 148880pps for 10 base-T
Address table 2K MAC address table, self-learning
Connect RJ-45
PoE port Port 1-4, PSE auto power management, Pin assignment as below:
  Pin assignment:
*B mode:
data pair A (1,2),
data pair B (3,6),
data pair C (4,5) plus V+
data pair D (7,8) plus V
  Port 5, 4 pairs PD
Maximum PoE Power Port 1-4: IEEE802.3af – 16.8W
IEEE802.3at – 35W
Total power – 70W
  Port 5: 90W (802.3at 2 event classification) INPUT
Current limited – 2A
PSE disconnect mode DC disconnect
PoE auto detection IEEE802.3af & IEEE802.3at (2 event classification signaling)
PoE protection Over -temp. over current , over/ under voltage)
LEDS *Link/Activity (Green ON/ Green Blinking @1000Mbps,
Yellow/Yellow Blinking @10M/100Mbps)
*PoE (Yellow) port 1-4 ON - PD detect
Port 5 (UPLINK) ON – 4 pair power,
Blinking-2 pair power
power *POWER Green-normal, Red-alarm
Power Input PoE source on Port 5 (UPLINK), and/or optional DC power supply on rear terminal
Power Consumption less than 5W when without PD loading
Power Efficiency 85% at full load (@48V typical)
Operating Temp. -20℃~ +75℃
Operating humidity 90% relative humidity, non- condensing
Storage Temp. -40℃~+85℃
Dimension 40mm(H)x118mm(W)x150mm(D) DIN RAIL Mountable
 
对于产品有任何疑问的话,请联系我们
​​